FIX 0xC1900101 – 0x40017: Installation failed in SECOND_BOOT phase in Windows 10 Update. (Solved)

This tutorial contains instructions to fix the Windows 10 Upgrade Error 0xC1900101 – 0x40017: "The installation failed in the SECOND_BOOT phase with an error during BOOT operation".

 

FIX 0xC1900101 – 0x40017 Installation failed in SECOND_BOOT phase

 

Windows 10 Upgrade Problem 0xC1900101 – 0x40017 in details: When you try to upgrade Windows 10 to the latest version (build) or when you try to upgrade your system from Windows 7 or 8.1 to Windows 10, the installation stops with error "We couldn't install Windows 10 – 0xC1900101 – 0x40017 – The installation failed in the SECOND BOOT phase with an error during BOOT operation", and then reverts back to the previous Windows version.

How to FIX Windows 10 Update Error 0xC1900101 – 0x40017 "Installation failed in the SECOND_BOOT phase with an error during BOOT operation"

The error code 0xC1900101 – 0x40017 during the Windows 10 upgrade, indicates a problem with an incompatible device, driver or program on the system. So, before you continue to apply the methods below, apply the following:

 

1. First of all, make sure that the Date & Time settings are correct.
2. Then, ensure that you have enough free space. Windows 10 requires at least 32 GB of free space to upgrade. To free up disk space use Disk Cleanup.
3. Install the latest drivers for all the devices on your system, especially for the Ethernet & the Wireless adapter (if any). *
4. Disconnect all external USB drives & SD cards and any other USB device that don't needed.
5. If you 're using a third-party antivirus program, then temporarily disable or -better- uninstall it.
6. Disable the Hard Drive Encryption (If enabled).
7. Finally, before restarting your computer to install the update, disconnect from the network. (e.g. Unplug the Ethernet cable or disable the Wi-Fi) adapter).

* Note:  If after applying the instructions in this article, the Windows 10 Upgrade Installation still fails, proceed and update also the BIOS (Firmware) on your system.

Method 1. Run the Windows Update Troubleshooter.

The first method to fix the Windows 10 update error 0xC1900101 – 0x4001E, is to run the Windows Update Troubleshooter.

1. Download and run the Windows Update Troubleshooter.
2. Click Next at the first screen.
3. Click Try troubleshooting as an administrator.

image

 

4. Follow the on screen instructions to fix problems with Windows update.

 

image

5. When the repair is completed, try to install the update.

 

Method 2. Delete the 'SoftwareDistribution' Folder.

The "C:\Windows\SoftwareDistribution" folder, is the location where Windows store the Windows Updates. Many times, this folder becomes corrupted and you must re-create it in order to download the updates from scratch. To rebuild (re-create) the "SoftwareDistribution" folder follow the steps below:

Step 1: Stop Windows Update Service.

1. Open Windows Services control panel: To do that:

  • Press Windows image_thumb8_thumb + R keys to open the run command box.
  • In the Search box, type: services.msc  & click OK.
  • (Accept the UAC warning if appears).

services

 

 

2. In Services control panel locate the "Windows Update" service.
3. Right-click on Windows Update service and select "Stop".

stop windows update service

 

Step 2: Delete the SoftwareDistribution folder.

1. Open Windows Explorer and navigate to: C:\Windows folder.
2. Find and Delete the "SoftwareDistribution" folder (or rename it. e.g. to "SoftwareDistributionOLD") .

 

softwaredistribution

 

Step 3: Start the Windows Update Service.

1. Open Windows Services control panel.
2. Right-click on Windows Update service and select "Start".

start windows update service

 

Step 4: Check and Install Windows 10 Update.

1. Navigate to Settings -> Update and Security and click Check for Updates.

 

Method 3. Update Windows 10 by using the Update Assistant

1. Navigate to Windows 10 download site and click the Update now button.

image

2. Save the "Windows10Upgrade9252.exe" file on your desktop.
3. Double click at the downloaded file to open the Windows Upgrade Assistant.
4. Click Update Now to start the update.

image

 

5. Let Windows to finish the downloading and the verification.
6. When the verification is reaches 100%, disconnect your computer from the Internet, or set it to "Airplane mode".
7. Wait until Windows updating your system.
8. When prompted, restart your system to install the update.

Method 4. Update Windows 10 from ISO/USB.

The next method to fix the Windows 10 update error "Installation failed in SECOND_BOOT phase" is to update Windows 10, from the Windows ISO file. To do that:

Step 1. Download Windows 10 in a ISO File.

1. Navigate to Windows 10 download page and download the Media Creation Tool.

image

 

2. Run the 'Media Creation Tool' and Accept the License Terms at the first screen.
3. Select Create installation media for another PC.

create Windows 10 DVD

 

4. At 'Language, architecture and edition' screen click Next.
5. Select ISO file and click Next.

download windows 10 iso

6. Save the 'Windows.iso' file to your desktop.
7. The Media Creation Tool will now begin to download the Windows 10 in an ISO format.
8. When the download is completed, close the Media Creation Tool.

 

Step 2. Update Windows 10 from the ISO file.

1. Disconnect your computer from the Internet, (or set it to "Airplane mode" if you own a laptop).
2. Disable or temporarily uninstall any third-party antivirus.
3. Then, right click on the "Windows.iso" file (on your desktop) and click Mount.
4. Double click at Setup application.

windows 10 setup

 

5. At the below screen choose 'Not right now' and click Next.

image

6. Follow the rest onscreen instructions to update your system.

Method 5. Clean install Windows 10.

The last method, to fix the Windows 10 Upgrade issues, is to perform a clean installation of Windows 10 on your system.

Important: The clean Windows 10 installation means that all your files and settings will be lost during the installation process. So, proceed and backup all your important files and settings to another storage media before continue. (e.g. to an external USB drive).

To perform a clean Windows 10 installation read the instructions on this article: How to clean install Windows 10

That's all folks! Did it work for you? Please leave a comment in the comment section below or even better: like and share this blog post in the social networks to help spread the word about this solution.

If this article was useful for you, please consider supporting us by making a donation. Even $1 can a make a huge difference for us in our effort to continue fighting spam while keeping this site free: