How to Restart an HP Server from iLO interface.

In this tutorial, we 'll find step by step instructions on how to restart an HP server remotely, by using the HP's iLO interface. HP Integrated Lights-Out (iLO) is a hardware component on the HP servers, which is usually integrated on the system board. The iLO component has its own network connection, IP address and web interface and can help the user to access and manage remotely the server.

How to Reboot an HP Server using iLO 5 web interface.

To restart a server if it hangs, from the iLO interface:

1. From another computer, open a web browser and in the address bar, type the IP address of the iLO interface on the server that you want to reboot.
2. Type the iLO username and the password and click Log in.

restart hp proliant server from ilo

 

3. Choose Power & Thermal on the left.
4. On the Virtual Power Button section, click the Reset button to restart your HP server. *

* Info:

  • The virtual Reset button has the same function as the Restart command in the operating system (warm boot).
  • The virtual Cold Boot button has the same action as the Shutdown command in the operating system. If you press the 'Cold Boot' button, the server will shutdown and will restart after approximately 8 seconds.

 How to Reboot an HP Server using iLO 5 web interface.

 

That's all folks! Did it work for you?
Please leave a comment in the comment section below or even better: like and share this blog post in the social networks to help spread the word about this solution.

If this article was useful for you, please consider supporting us by making a donation. Even $1 can a make a huge difference for us in our effort to continue fighting spam while keeping this site free: